Product Description

Specification Of Intelligent Dimming 1500mm 24W Motion Sensor T8 LED Tubes Infrared Sensor LED Tube

 

Power 24W
LED Type SUMSUNG/EPISTAR SMD LEDs
Standby Power 5-7W
Luminous Efficacy at 5000K 95LM/W
Input Voltage AC100-277V
CCT 2700-6500K
Power Factor >0.9
Beam Angle 180°
Induction Beam Angle 115°
CRI >70Ra/>80Ra
Ingress Protection IP44
Junction Temperature <61℃(Ta=30℃)

Operating

Temperature

-30~+50℃
Lifespan ﹥50000Hrs(Ta=30℃ @L70)
Application Parking lots, school, public area.
Main Materials AL6061, PC
Dimension Ф32.5*28.5*1498±1mm

 

 

 

Application About Infrared sensorT8 LED Tubes:


1. Hotels
2. Conference/meeting room
3. Commercial Complexes
4. Residential/Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General lighting, Commercial lighting, plant growing lighting.
7. Refrigeratory, Freezer
8. Advertisement box,
9. Parking lot, corridor, ect.

Installation steps(double ends powered input):


 Turn off the electricity supply before installation.
 Make sure the circuit of the base is as following A2 and B2. For old circuit originally for
conventional T8/T10 fluorescent, please following the illustrated steps to adjust the circuit as follow.

Intelligent Dimming Motion Sensor LED Tube 5FT 24W T8 LED Tubes Double Ended Powered

 For Figure A1 circuit, after removing the starter, the LED tube can be installed directly onto the G13
base(see Figure A2).
 For Figure B1 circuit, please removing the electronic ballast, and connect L and N to the joints in
the base separately (see Figure B2).
 After adjusting the circuit, install the LED tube in the same way as installing the traditional
fluorescent tube light. Turn on the power supply of the base to check whether the tube light is
working properly or not.

Hits: 【Print】 

Related Products

T8 LED Tube ligh...